Hello All, today we have an extremely talented blogger & crafter on our blog, Angela Jose!
Angela absolutely loves crafting & DIY. She inspires others to create pretty things,
through detailed tutorials. Hope you enjoy reading :-) Over to Angela.
Hello All, I have been looking for a very long time to
make a crafting den on my own but never ever have I seen a messier place than
my crafting table! I have hence decided to add some shelves for extra storage
space and some crafts to fill up blank work space. Well this tutorial is for
DIY shadow box which I made for use as photo frames for my wall. They are
simple and easy to make except for a little math that I have covered up for you
:) So shall we start?
Materials
required to make DIY shadow box:
- Pattern
papers of sixe 16"x16" : The patterns I have are from ItsyBitsy
- Score
and trim board (or alternately an empty pen, ruler and pair of scissors)
- Glue
How to make
these simple DIY shadow box :
As I told you, the math is a little confusing
but otherwise, its a very simple craft. I advise you to blindly follow the
measurements given here and try out a shadow box using any scrap paper that you
have so that you can understand the exact math and create boxes of your own
sizes.
For now, I have given the measurements for DIY
shadow box of size 6"x 8" and inner frame size 5"x
7" and you can try these out. For variations in measurement of the
boxes, keep reading and I tell you how to calculate.
Place your paper and score at positions
: 0.5", 1",1.5",2" and at 10",10.5", 11",
11.5" . Turn your paper 90 degrees and score at
measurements 0.5", 1",1.5",2" and at 8",
8.5", 9", 9.5" and 10". You need one more scoring of
length one inch at measurements 2.5" and 9.5". Rotate your paper 180
degrees and score one inch at measurement 2.5" and 9.5"
Now that you are done with the scoring, lets
start marking out the cutout. Follow the image and mark with a pencil for all
four corners and then cut them out with your scissors. ( Doesn't look like its
understandable as to where to mark! Scroll down to the bottom of this post for
a link for pdf file from where measurement template can be downloaded). https://drive.google.com/open?id=0B42e08tqCj2CRXZGMFdTc01sdUE
Next fold along all of the score lines and lets
get started with sticking them. I tried sticking with red tacky tape but I
couldn't realign once pasted and that was a major drawback so I used glue which
was easier.
Start with the side where the scored portion
has straight cut. Apply glue to the edge of the folded panel as seen in the
picture. Make sure you apply glue all over the strip especially towards the
score/fold so that the frame stays well. Fold the sheet and hold it tight for 1
minute so that the glue sets right. Make sure your fold looks like a perfect
square shape like in below photograph when seen from the side. If your
alignment is wrong your frame will end up wobbly and unsymmetrical so while you
are doing, take utmost care- after all its just a matter of few minutes!
Once you have completed these two side, you can
start the other two sides the same way. The only difference this time will be
that the shape will be a bit different to add a small triangular portion. While
applying glue this time, you can apply a tiny dot at the triangular area as
well so that the frame on all sides stays together.
While I made the box first, I did not apply
glue at the triangle area so this was the result. I could see gaps at the
corners because the shadow box frame of all sides weren't holding together.
I used tacky tape pieces at the triangle are to hold them together but alternately,
while you are sticking the frame itself, you can apply glue at the triangle
area. I have also used Itsy Bitsy's embellishments like bows, chipboard shapes, metallic paint.
So thats it. If you have the measurements in
hand, making these DIY shadow box is a cakewalk. Lets get into the math behind
these DIY shadow box then :-D
Measurements to
make DIY shadow box
Paper size = 12"x12"
Maximum inner frame size of shadow box =
7"x7" which means your W& L shouldn't be more than 7 inches. If
you have understood the math, you can extend it to any measurement of pattern
paper and any frame size.
Say width of your proposed frame = W and length
= L then your score lines will be at :
1/2", 1", 1 1/2", 2"
and (3+W)", (3+W) 1/2", (4+W)", (4+W)1/2",
(5+W)" , (5+W)1/2
rotate paper 90 degree and score at
1/2", 1", 1 1/2", 2"
and (3+L)", (3+L) 1/2", (4+L)", (4+L)1/2",
(5+L)", (5+L)1/2
Don't forget to score a one inch line at 2
1/2" and (2+L) 1/2"
If there is any extra paper beyond your last
scored line, you should trim them out before starting to fold at the scored
lines.If these are too confusing, don't worry I have a prepared a standard
chart for all measurements of shadow boxes that you can create from a 12"x
12" paper.
Hope you enjoyed watching the tutorial. I used
these shadow boxes to hold few of my favorite photographs and also a few
quotes. This pretty handwritten quote with handmade embellishment one was sent
to me by my pen friend Piyu :) Do check out few more simple crafts on
my blog and let me know if you want to see any specific craft.
Until next time
xoxo Angela
