Hi there..Lekha
You would need following items before you start working with Resin:
Tip: If you do not have gloves at home and by mistake touch the resin do not panic, just rub any oil(hair/body/cooking oil) and wash thoroughly with soap.
Another tip I would suggest is keep all your pieces ready and then make the resin batch in small quantity to avoid any wastage.Resin and hardener mix would have a work window of 5 min approx so you can pour into all your findings simultaneously. As for the curing,resin takes 24 hrs to fully cure.
I would be making rings, pendants, earrings.So lets start...
I also used metallic paints (teal metallic paint, broccoli metallic paint) to paint these bezels.
You would require Flat Aluminium wire, these come in various colors and are easy to bend and cut. I took the wire and bend it into square shape with the help of Jewelry pliers (Chain Nose Mini Pliers and than cut with help of Side Cutting Pliers). Next adhered the empty square piece to clear tape.
I have used the beading wire to wrap the square resin piece to form it into a pendant.
For these earring pairs I made very small batch of resin mixed with different colors of glitter dust and then poured with help of toothpick as the the design is very intricate.
For this I painted both sides of the frame, each in black and silver colors. Adhere the chipboard frame to the tape and poured clear resin mix into the center of the chipboard frame and use popsicle to spread the resin evenly in all directions. Here I did not mix the sparkle dots in the resin mix but put it while the resin was wet.
Today I would be sharing my first try with Resin, and had fun making these little pieces of jewelry. This craft resin & hardener is ideal for jewelry making, dome stickers, dome embellishments and to coat wooden furniture for sheen & protection. It is water resistant when dry and gives a glossy finish to your projects.
It might sound little tough to deal with resin and hardener , just follow the instructions. Resin going in first and than the hardener. Let the mix sit for few seconds so all the bubbles rise to the top,if there are many just scoop the top layer with popscile.
Itsy Bitsy resin comes in various colors, here I have used the clear resin.
Itsy Bitsy resin comes in various colors, here I have used the clear resin.
- Measuring cup or if you do not have any then just take disposable paper cups and mark them.
- Small plastic spoon or Popsicle.
- Surgical gloves (avoid touching the resin mix with bare hands), you can get them at any pharmacy.
- Toothpick (if you will be working with very small areas)
- Glitter dust (make small batch of resin and mix any color of glitter dust to achieve some great looking pieces)
- Sparkle dots
- Straw (this would come in handy if bubbles arise after pouring the resin. A light blow with straw and you would be able to get rid of all the bubbles.)
Tip: If you do not have gloves at home and by mistake touch the resin do not panic, just rub any oil(hair/body/cooking oil) and wash thoroughly with soap.
Another tip I would suggest is keep all your pieces ready and then make the resin batch in small quantity to avoid any wastage.Resin and hardener mix would have a work window of 5 min approx so you can pour into all your findings simultaneously. As for the curing,resin takes 24 hrs to fully cure.
I would be making rings, pendants, earrings.So lets start...
Pendants
Cut round pieces from any pattern paper of your choice to the size of the bezel
Stick with silicon glue and let dry.
I also used metallic paints (teal metallic paint, broccoli metallic paint) to paint these bezels.
Here are three different pieces...
The first pendant in the picture has clear resin poured into the bezel and then I dropped few glass beads randomly before the resin set in.
The middle pendant (painted with teal metallic paint) has resin mixed with aqua glitter dust.
The third green has pattern paper and clear resin.
Rings
For the first one I painted the ring base in black acrylic paint and than poured the resin mixed with parrot green glitter dust.
For the second ring after pouring the resin mix (aqua glitter dust)I embedded crystal piece before the resin set in.
Earrings
I repeated the same procedure of adhering these metal heart charms to the tape and then firmly pressing it so no space is left for the resin to flow from beneath the charm. Once the resin has taken its time to cure (24 hrs), remove the tape and if you find any tape residue on the resin just wash it with mild soap water and pat dry.For these earring pairs I made very small batch of resin mixed with different colors of glitter dust and then poured with help of toothpick as the the design is very intricate.
Hope you liked my experiments with Resin.
Thanks for stopping by and do leave some love.
Supplies used: